stainless tools for sterile processing for Steritool

Steritool is the leading source for stainless steel hand tools for sterile processing and cleanroom applications.
We have the widest range of stainless tools for off-the-shelf delivery from our warehouse direct to your facility.

As The Global Source for Stainless Steel Tools, borders are just lines on a map.
We ship worldwide. Any size order, small or large, from a padded envelope to a pallet.
Steritool stainless steel hand tools are the solution to your aseptic or critical environment processing needs.

***ALL PRICES ARE EX WORKS / FOB***

NOTE: ORDERS UNDER $100.00 ARE SUBJECT TO A $15.00 SERVICE CHARGE.

WIRE TRANSFER PAYMENTS UNDER $1000.00 ARE SUBJECT TO A BANK FEE OF $25.00.

CERTIFICATE OF CONFORMANCE ARE AVAILABLE ON REQUEST FOR A FEE OF $15.00 EACH.

SALT SPRAY TEST RESULTS

   


Color Code Your Tools

BUILD YOUR OWN TOOL
Build Your Own Tool

INSTRUMENT OIL
Instrument Oil

BENCH PRESS
Bench Press

TOOL RAIL & CLIPS
Tool Rail (Socket Rail & Clips)

CABINET KEYS
Cabinet Key

CHAIN WRENCH
Chain Wrench

CHISELS
Chisels

CLAMPS
C Clamps
Mini C Clamps
Deep Clearance Locking Clamps
Tube Clamp
Sliding Bar Clamp
Spring Clamp

DRILL STOPS
Drill Stops

FILES
Hand Files

FEELER SETS & GAUGE STICK
Feeler Gauge Sets & Gauge Stick

Individual Feeler Gauge Stock

FORCEPS & TWEEZERS
Hemostat Forceps & Tweezers

GREASE & CAULKING GUN
Grease Gun & Caulking Gun

HACKSAW
Stainless Steel Hacksaw

HAMMERS & HAMALET
Ball Pein Hammer & Hamallet

HANDLES
Stainless Handles

HEX KEYS (Allen Keys)
Precision Mini Hex & Ball Hex
Ball End Hex Keys
Standard Hex Keys
T Hex Keys, formed & welded
Ball T Hex Keys, formed & welded

ORTHO Hex Drivers with Handles
Ball Drivers with Handles
1/4" Square Drive Hex Bits
3/8" Square Drive Hex Bits

1/2" Square Drive Hex Bits

Fold-up Hex Key Sets
Hex Bits and Hex Power Bits

ICE PICK, O-RING TOOL, POINTER
ICE Pick, O-Ring Tool, Pointer

KNIVES
Knives

MALLET & HAMALLET
Mallet & Hamallet

NUT DRIVERS
Nut Drivers

PLIERS:
Five Position Pliers
Two Position Pliers
6 1/2", 7", and 8" Pliers
Gripping Pliers (5")
Locking Pliers
Locking Pliers with Slap Hammer
Needle Nose Pliers
Parallel Jaw Pliers
Wire Cutting (Linesman) Pliers
Wire Twister Pliers

PRY BARS, HEEL BARS & WEDGES
Pry Bars
Heel Bars
Alignment Bars
Wedges

PUNCHES
Center, Drift, & Tapered Punches
Hole Punches

RETAINING / CIRCLIP PLIERS
Retaining / Circlip Pliers

SCISSORS
Scissors

SCRAPERS
Scrapers

SCREWDRIVERS
Phillips
Parallel Tip
Robertson Square
"Mini" Precision Screwdrivers
Screwdrivers Bits and Bit Holder
"Stubby" Screwdrivers
Screw Remover  

SOCKETS
Offset Sockets
Flex Socket Wrench
1/4", 3/8", 1/2", 3/4" & 1" Drive Sockets
Wing Nut Sockets
12 Point Sockets

SOCKET ACCESSORIES
1/4", 3/8" and 1/2" Ratchet
3/8" Thumb Ratchet
Torque Wrench
Adaptors & Extensions
Power Bar, Speed Wrench & T Wrench
Breaker Bar

1-1/2" SOCKETS & ACCESSORIES
1-1/2" Sockets & Accessories

STAR / HEX LOBE (TORX)
Star / Hex Lobe - Keys & Drivers

STERILIZATION TRAYS
Trays & Tool Totes 

STRAP WRENCH
Strap Wrench

TAP HANDLE/WRENCH
Tap Handle/Wrench

TORQUE WRENCH
Torque Wrench

TOOL BOXES AND CABINETS
Portable Tool Boxes
Roller Cabinets

TWEEZERS
Tweezers

TUBE WRENCH/SOCKET
Tube Wrench/Socket

VISE
4" & 2" Bench Vise

WIRE STRIPPERS
Wire Strippers

WIRE CUTTERS
Diagonal Cutter
Wire Cutting (Linesman) Pliers

WRENCHES
Adjustable Wrench
Pipe / Stillson Wrench
Combo & Open-End Wrenches
Double Box End Wrench
Crowfoot Wrench
Flex Socket Wrench
Slim Wrench
Hook & Pin Wrench/Spanner - Adjustable
Offset & Flare-Nut Wrench
Tap Wrench 'T' Handle

NM NUT DRIVERS
NON-MAGNETIC Nut drivers

NON-MAGNETIC HAMMERS
Non-Magnetic Hammer

NON-MAGNETIC TWEEZERS
Non-Magnetic Tweezers

NON-MAGNETIC SCISSORS
Non-Magnetic Scissors

NON-MAGNETIC HEX KEYS
NON-MAGNETIC Hex Keys
NON-MAGNETIC 3/8 Dr Hex Key Bits
NON-MAGNETIC Ball End Hex Keys
NON-MAGNETIC Ball Drivers
NON-MAGNETIC T Hex Keys

NON-MAGNETIC PRY BARS
NON-MAGNETIC Pry Bars
NON-MAGNETIC Alignment Bars

NON-MAGNETIC PUNCHES
NM Center, Drift, & Tapered Punches

NM SCREWDRIVERS
NON-MAGNETIC Screwdrivers
How Much Money Can Steritool Save You in One Year?
Hand tools manufactured from stainless steel offer the most cost effective solution for maintenance of process equipment inside a cleanroom or other critical environment. While your initial investment will be higher with stainless steel tools than with regular carbon steel tools, your ROI (Return On Investment) is quickly achieved in the short-term and easily maximized in the long-term. Because stainless steel is an homogenous material, there is no plating or coating of any kind to peel, break, or chip. For this reason, stainless tools will withstand the autoclave process many thousands of times. The same cannot be said about a standard carbon steel tool which would deteriorate under that same critical process, quickly rendering it unsuitable for any sterile application. In fact, the number of times a carbon steel tool can be effectively sterilized can usually be counted on both hands. Most people prefer to add up a different set of digits: the one that demonstrates savings.

Commitment to Quality
                                       ...and Education

Sterile processing requires the right tools and the right training. Steritool is a proud sponsor of a series of continuing education courses developed by The University of Tennessee College of Pharmacy specifically for training in the preparation of parenteral products. Course attendees learn the procedures and techniques of aseptic processing, process validation, and quality control, and gain direct experience in processing parenterals. Our stainless steel tools are used during this hands-on  training program in the University's Parenteral Medications Laboratories.

With several sessions scheduled throughout the year, the PDA's Training and Research Institute offers a versatile schedule for its comprehensive two-week Aseptic Processing Training Course. The program offers manufacturing, QA/QC, and validation personnel a balance of hands-on and lecture training in aseptic processing. Committed to education, TRI is approved by the Accreditation Council for Pharmacy Education (ACPE) as a provider of continuing pharmaceutical education. Course attendees are eligible for eight Continuing Education Units (CEU).

Aseptic processing requirements cut across a variety of industries. Purdue University's Aseptic Workshop is designed to provide attendees with the knowledge of the technology used in the development and operation of aseptic systems applied to the food processing and packaging industries. Attendees participate in process demonstrations, packaging integrity tests, testing methods in chemistry and microbiology, and learn the essential scientific and engineering principles needed to apply aseptic technology. This hands-on course in aseptic processing, now in it's twenty-second year, is an industry leader.

Special Orders
Steritool specializes in short-run custom orders to meet the individual needs of our customers. Whether it be a modification to one of our existing tools, extra-long hex keys, or the manufacture of a new tool not available in stainless, we will work to provide the tools for your particular application. If you do not see what you are looking for among our products, email us with a request for quotation. Please be as specific as possible about the tool and the application, the quantity required, and let us know if you have a drawing or sketch you can provide.
stainless steel combination wrench stainless steel crow's foot wrench
This one-off 1 3/4" 12 pt combination wrench made from 304 stainless steel (left) and this stainless steel crow's foot wrench (right) were designed for  specific applications in a sterile environment.

Inventory
We manufacture our tools and distribute directly to the end user. We typically ship out orders from our large inventory within 1-2 days after receiving them, and rush orders are welcomed. We know your contamination control requirements cannot wait. You save time and money by ordering directly from the source.

People Often Ask...                                                                  
...about stainless steel and magnetism. Many people have the misconception that all stainless steel alloys are non-magnetic. But in fact all stainless alloys (and there are dozens of them) contain iron, and iron is magnetic. What makes an iron-containing alloy non-magnetic has to do with its structure at the molecular level, and its complete explanation  requires deeper analysis than we can provide here. But it is true that the stainless alloys most people encounter in their day-to-day life are likely to be non-magnetic, austenitic alloys, used in everyday items such as sinks, kitchen utensils and appliances. However, these same common stainless alloys are not likely to be the same alloys used in the fabrication of hand tools, due to their inability to achieve the necessary level of hardness required for the effective use of most tools. For most tools, ferritic and martensitic alloys are used, which are magnetic.

STERITOOL INC.
2376 LAKESHORE BLVD
JACKSONVILLE, FL 32210 USA

TEL:(904)-388-3672, (904)-388-3792, (904)-388-3802

FAX: (904)-388-3712

e-mail: steritool@steritool.com

 

Manufacturers of professional quality stainless steel hand tools designed for use in critical production, sterile, Cleanroom, or corrosive environments. Our tools are designed and manufactured in full compliance with the established standards of
ISO 9001: 2000
All Steritool products meet or exceed ANSI, SAE, DIN,& British Standards specifications.

____________

  |  home  |   index of tools  |   view shopping cart  |   download product catalog  |   about Steritool  |   Steritool FAQ  |   Steritool news  |   press releases  |   care and maintenance  |  

 |  galvanic corrosion  |   stainless steel descriptions  |   Steritool direct  |